Home > Rhino tutorials, Tutorials > A tutorial derived from network command

A tutorial derived from network command

A rhino tutorial  offered by a support engineer from Mcneel. This type of surface  is common in phone design.

Brief intro:

1. Create the main surface (rail revolve). split the surface.

2. Network.

3. Select the control points as shown in Figure3, when the control points move following the z direction.

network-surface-1

network-surface-2

March 6th, 2009 Leave a comment Go to comments
Tags: ,
  1. kanyes east
    March 6th, 2009 at 21:35 | #1
    Reply | Quote

    do you have a link to the original post this came from?

    • nnnaaarrr
      March 7th, 2009 at 00:34 | #2
      Reply | Quote

      @kanyes east: I dont have. I’ll add the link, If there is any.

  2. kanyes east
    March 7th, 2009 at 04:58 | #3
    Reply | Quote

    what command was used in step 2?

    • nnnaaarrr
      March 7th, 2009 at 15:56 | #4
      Reply | Quote

      @kanyes east: You can watch the video tutorial here.

  1. March 7th, 2009 at 15:52 | #1
    Network- base tutorial | Rhinoceros
  2. March 16th, 2009 at 05:02 | #2
    rhino network tutorial | Network