Network- base tutorial
Hi, all. I made this video tutorial—A tutorial derived from network command.
The Text tutorial offered by the support engineer from Mcneel. Sorry, I do not have the original link.
c56faee9bfd621c81f38892dcdf6a8a3-322
About Me
Contact me: x.nardo#gmail.com (replace # with @ )
Xiamen, China.
Links
Archives
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
great! thanks for posting this.
the tut is clear, but i’m still having issues w/ the edges of split area from the original surface not following the curves and there being a gap between the network srf and the original polysrf. any tips?
@kanyes east: the network srf and the original srf? That will be OK as long as you set the right. At the end of the video, I join the two srf.
yeah, i did the srf join. there’s still a micro break in the networked srf. do you have an email to send the file to for u to look at?
@kanyes east: x.nardo@gmail.com
great tut, keep them coming!