Rope on a curve
Steps:
1.Path Curve.
2.Spiral curve (Command: Helix, Around the path curve).
3.Orient the profile curve on the path curve. (Command:OrientOnCrv with Perpendicular option)
4.Sweep along 2 curves, select path & Spiral curves as the rails.(Command:Sweep2)
Patterning with 2 attractive Points
Url:Design Reform
===Description===
Software : Rhinoceros & Grasshopper (Explicit History)
Basically the idea is to drive the radius of the circles with the distance between the point(s). The circles then use the MIN component and a range factor to limit how big the circles can get as well as the area of influence of each point.
Porcelain doll
Introduction:
This time we are modeling the body of a Porcelain doll. Not so accurate, but easy enough!
Method:
Loft&Blend {Tips:In order to facilitate the adjustment of shape, recording history must be turned on for ‘loft’}
A shape resembling Horsebean
Introcuction:
As shown in Figure, we will try to make a shape resembling horsebean in this tutorial. Here I will introduce two ways to accomplish this practice.
Thanks to:
Modern
Dixon(Mcneel Technical Support Specialist)
[Vray] matte-shadow material
Author:
Micha
Url:
Asgvis.com
Introduction:
Always we need a white ground with shadows, there is no visible white ground at the reflections, And this workflow is a good workaround for this problem.
If you can put out a better way, please do so.